NONPLUS COMPONENTS IS BOOST rear hub

Three decades of experience in the development and production of hubs have left their marks, albeit “very light ones”.
Over the years, the head of development at NONPLUS COMPONENTS, Christian Jenny, was able to accumulate immense specialist and practical knowledge, which in 2016, after finding an investor, led to the production of the first own prototypes.
In order to be able to guarantee the precise production of the hubs, the company Frank Präzisionsteile GmbH from Murr in Baden-Württemberg, which is also the investor, took over the production. A little later, in 2018, NON + was registered as a trademark. Since then, the wheels at one of the most innovative think tanks for bike components in Germany have not stood still. New concepts are constantly being developed and patents registered in order to be able to set new standards in the future.

Precision and quality
The elimination of disruptive factors such as flex, vacuum effect, spoke tears and tolerances, through the highest precision in material selection, manufacturing process and quality assurance, enable a warranty period of 4 years!

NONPLUS bevel gearing
The unique freewheel mechanism of the NONPLUS hubs has approx. 400% more contact surface than conventional systems and enables maximum power transmission with minimal wear. This is a great advantage compared to conventional ratched systems, since there the forces are transmitted selectively rather than over an area by the freewheel. Special, very elaborately manufactured tooth backs, reduce the abrasion many times over, a hard anodizing ensures long durability.

Tooth to tooth
The 1: 1 toothing plays a major role in the perfect ratio of pedal kickback and propulsion. This guarantees a direct power transmission via 45 defined locking points without detours from the freewheel into the hub body.

E-bike compatible
Although the hubs hardly weigh more than 170g, they are still fully suitable for e-bikes (pedelecs).

simplification
The filigree transition between the brake disc mount and the flange saves weight and generates more strength at the same time.

Non vacuum effect
A unique ventilation system prevents the creation of negative pressure due to temperature fluctuations in the hub. This means that no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably easy running of the bearings.

special seal
Micro-gap end caps improve the sealing of the individual hub components.

Technical specifications:

intended use : Cross Country to E-Bike
Material: aluminum
Freewheel body material: aluminum, hard anodized for low wear
axle type : 12×148 mm plug axis (Boost / outboard)
Number of holes: 28 or 32 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: 11-speed and 12-speed SRAM XD (MTB) or Shimano Micro Spline 12s
Freewheel type: bevel gearing, 45 grids
bearing : 4x Industry deep groove ball bearings (1x 17287 2RS, 3x 6803 2 RS)
Spoke type: Standard spokes (J-Bend)
Max.admissible spoke tension: 1200N
maximum system weight: n / a
Color: black with white lasered decals

Weight according to the manufacturer: 170g