FREE SHIPPING ON ORDERS OVER €1000 - all over Europe
* the website is focused on the wheelset configurator, some separate wheels components like rims, hubs and spokes may not be realized separately due to the stock & suppliers contracts protection
Previous
Previous Product Image

NONPLUS COMPONENTS IS BOOST rear hub

529.00
Next

NOVATEC 791 IS front hub

54.99
Next Product Image

NONPLUS COMPONENTS IS BOOST front hub

219.00

NONPLUS COMPONENTS IS BOOST front hub

Three decades of experience in the development and production of hubs have left their marks, albeit “very light ones”.
Over the years, the head of development at NONPLUS COMPONENTS, Christian Jenny, was able to accumulate immense specialist and practical knowledge, which in 2016, after finding an investor, led to the production of the first own prototypes.
In order to be able to guarantee the precise production of the hubs, the company Frank Präzisionsteile GmbH from Murr in Baden-Württemberg, which is also the investor, took over the production. A little later, in 2018, NON + was registered as a trademark. Since then, the wheels of one of the most innovative think tanks for bike components in Germany have not stood still. New concepts are constantly being developed and patents registered in order to be able to set new standards in the future.

The NONPLUS front hub forms the heart of your new, ultra-light wheelset. Despite its weight of almost 86g, the hub has no restrictions in terms of its intended use of application. The black anodized aluminum not only looks beautiful, it also protects the oversized hub body from corrosion. In the end, the whole thing revolves around two high-quality 6803 2RS deep groove ball bearings, which are placed on a 17 mm axle . The end caps are the microgap end caps, which also form a seal against the elements.

GEN2
Thanks to high-precision manufacturing and perfect quality control, the hubs of the second generation get by without the previously used adjuster for the bearing play. This means that you always have a perfectly adjusted hub with a smooth, easy run.

Precision and quality
The elimination of disruptive factors such as flex, vacuum effect, spoke tears and tolerances, through the highest precision in material selection, manufacturing process and quality assurance, enable a warranty period of 4 years!

simplification
The filigree transition between the brake disc mount and the flange saves weight and generates more strength at the same time.

Non vacuum effect
A unique ventilation system prevents the creation of negative pressure due to temperature fluctuations in the hub. This means that no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably easy running of the bearings.

special seal
Micro-gap end caps improve the sealing of the individual hub components.

Technical specifications:

intended use : Cross Country to E-Bike
Material: anodized aluminum
axle type : 15×110 mm thru-axle Boost
Number of holes: 28 or 32 holes
Brake disc mount: 6-hole (IS2000)
bearing : industrial deep groove ball bearings (2x 6803 2RS)
Spoke type: Standard spokes (J-Bend)
Max.admissible spoke tension: 1200N
maximum system weight: n / a
Color: black with lasered decals

Weight according to the manufacturer: 85g

SKU: N/A Categories: , , Tags: , ,

Description

NONPLUS COMPONENTS IS BOOST front hub

Three decades of experience in the development and production of hubs have left their marks, albeit “very light ones”.
Over the years, the head of development at NONPLUS COMPONENTS, Christian Jenny, was able to accumulate immense specialist and practical knowledge, which in 2016, after finding an investor, led to the production of the first own prototypes.
In order to be able to guarantee the precise production of the hubs, the company Frank Präzisionsteile GmbH from Murr in Baden-Württemberg, which is also the investor, took over the production. A little later, in 2018, NON + was registered as a trademark. Since then, the wheels of one of the most innovative think tanks for bike components in Germany have not stood still. New concepts are constantly being developed and patents registered in order to be able to set new standards in the future.

The NONPLUS front hub forms the heart of your new, ultra-light wheelset. Despite its weight of almost 86g, the hub has no restrictions in terms of its intended use of application. The black anodized aluminum not only looks beautiful, it also protects the oversized hub body from corrosion. In the end, the whole thing revolves around two high-quality 6803 2RS deep groove ball bearings, which are placed on a 17 mm axle . The end caps are the microgap end caps, which also form a seal against the elements.

GEN2
Thanks to high-precision manufacturing and perfect quality control, the hubs of the second generation get by without the previously used adjuster for the bearing play. This means that you always have a perfectly adjusted hub with a smooth, easy run.

Precision and quality
The elimination of disruptive factors such as flex, vacuum effect, spoke tears and tolerances, through the highest precision in material selection, manufacturing process and quality assurance, enable a warranty period of 4 years!

simplification
The filigree transition between the brake disc mount and the flange saves weight and generates more strength at the same time.

Non vacuum effect
A unique ventilation system prevents the creation of negative pressure due to temperature fluctuations in the hub. This means that no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably easy running of the bearings.

special seal
Micro-gap end caps improve the sealing of the individual hub components.

Technical specifications:

intended use : Cross Country to E-Bike
Material: anodized aluminum
axle type : 15×110 mm thru-axle Boost
Number of holes: 28 or 32 holes
Brake disc mount: 6-hole (IS2000)
bearing : industrial deep groove ball bearings (2x 6803 2RS)
Spoke type: Standard spokes (J-Bend)
Max.admissible spoke tension: 1200N
maximum system weight: n / a
Color: black with lasered decals

Weight according to the manufacturer: 85g

Additional information

Weight 85 g
holes

28H, 32H

hub axle - front

15×110 BOOST

hub version

IS / 6-bolt

lacing

j-bend / classic

Reviews

There are no reviews yet.

Be the first to review “NONPLUS COMPONENTS IS BOOST front hub”

Your email address will not be published. Required fields are marked *

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping